Vagbremtechnic

57.1mm Hub Spigot Extenders (Pair)

2 reviews Write a Review
Vagbremtechnic hub spigot extenders for 57.1mm hubs. When fitting wheel spacers, usually below 10mm, they are known as being NOT Hubcentric, this means that th…
SKU: SPIGEXT(x2)
Shipping: Calculated at Checkout
Part: Misc
£25.00 (Inc. VAT)
£20.83 (Ex. VAT)

57.1mm Hub Spigot Extenders (Pair)

£25.00 (Inc. VAT)
£20.83 (Ex. VAT)

Vagbremtechnic hub spigot extenders for 57.1mm hubs.

When fitting wheel spacers, usually below 10mm, they are known as being NOT Hubcentric, this means that there is very little wheel contacting the hub for weight transfer, and in some cases no contact at all and all the weight of the car is going through the wheel bolts. 

With our hub extenders these tightly fit in to the OE hub and extends the hub length so that proper wheel to hub contact is made. Making sure that the weight of the car is put though the hub and not the wheel bolts. 

These extenders are designed for front hubs but may fit some rear hubs. Please check before ordering. 

These extenders are a very tight fit in to the OE hub so for correct fitment proper cleaning of the hub is required. 

 

Customer reviews

2 Reviews Write a Reviews
  • Does what it says
    5

    Posted by Richard Broadfield on 4th Jul 2021

    Bought these spigot extenders so that I could run <10mm spacers without vibration. They do exactly what they say they do, excellent quality, a good tight fit (tapped them in with a mallet) and do a perfect job.

  • 57.1mm extenders
    5

    Posted by Cousin on 12th Jul 2019

    Parfait ! J'avais des vibrations enotre 90 et 110 km/h avec des cales de 5mm, problème réglé avec ses extensions de moyeux. Montage facile, bien nettoyer le moyeux avant la mise en place.

Customers Also Viewed